Sorensen, DCS55-55M62

You are here: Power Supply (DC) » Single output

Sorensen, DCS55-55M62
Above pictures can be different from actually sold item as well as the installed options. On request we'll send you high resolution pictures and options of the real item.
Product description

The DCS Family of 1 kW, 1.2 kW and 3 kW programmable power supplies incorporate current mode switching rates up to 100 kHz in high power density, low profile chassis. Utilizing unique packaging techniques, the DCS Family provides continuous full output power (1 kW, 1.2 kW or 3 kW) in any volt/amp combination within the rated output voltage and current limits.

This family has 10-turn potentiometers to adjust voltage and current settings that are displayed simultaneously. LEDs indicate overtemperature, remote programming, shutdown and overvoltage protection, status and constant-voltage/current mode operation.

  • Input Power:
    Voltage 208-230VAC (tested to 190 to 253 VAC)
    Frequency 47-63Hz
    Single or three phase (maximum output current is 45A with single phase input, 2.5 kW)
  • Transient Response:
    A 30% step load will recover to within 2% of original value within 10ms.
  • Stability:
    ±0.05% of set point 8 hours after 30 minute warm-up time at fixed line, load and temperature
  • Output Ripple (RMS): 10mV
  • Volt Range: DC-55V
  • Current Range: DC-55A (45A single phase input)
  • Max Power Output: 3kW (2,5 kW single phase input)
  • Max current: 55A (45A single fase)
  • Max. Voltage: 55V (3kW)
  • Min. Voltage: DC